Продукти

Types

Air starters - Direct: p 6a, 10a n, p 16, p 25a, 40a n, p 63f - are intended for direct starting, stopping and protection from unacceptable load of three-phase asynchronous motors.
Air starters - Reversible: BC 25e- are intended for inclusion reversing, exclusion and overload protection of three-phase asynchronous motors.
Air starters - "Star / Triangle": pzt 40e, 63f pzt, pzt 100f, 160f pzt - intended to be placed under the scheme "star / triagilnik" off and overload protection of three-phase asynchronous motors.

Purpose

Contactors are designed for direct start, stop and overload protection of asynchronous motors.
Contactors are designed for operation in premises with a normal fire hazard according to the regulation №2 for FSCTN.

Installation

Contactors mounted on a vertical non-flammable base with a tolerance of mounting position to 15˚. Connecting the starter is in accordance with the instruction starter.
Must be placed fuses for protection against short circuits according t.Iii.
The introduction of the cables must meet the requirements of the ordinance №2 for FSCTN.

Exploitation

For operation and maintenance must comply with all requirements of the regulations on technical safety.
Installation, operation, maintenance and repair of the contactors must be performed by qualified persons for these activities.
It is recommended that contactors be periodically cleaned from dust and other contaminants. Following an exclusion from the short circuit should be inspected and power contacts in case of welding or destruction to be replaced.
Recommended twice a year, spring and autumn, to reset the thermal relay to compensate for the impact of climate temperature.

Пускател тип П6А

Аir switches type P6A

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...
Пускател тип П10А

Аir switches type P10A

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...
Пускател тип П16А

Аir switches type P16A

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...
Пускател тип П25А

Аir switches type P25A

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...
ПУСКАТЕЛИ тип  П 63Е, П 100Е

Аir switches type P63E, P100E

Technical Data NAME measure P 63f P 100U Rated voltage naizolatsiyata main chain V secondary circuit V Rated thermal current interrupted extended mode / eight-hour / ...
ПУСКАТЕЛ РЕВЕРСИВЕН тип ПР 25 Е

Starters reversible type IP 25 E

Technical Data NAME measure IP 25 E Rated voltage naizolatsiyata main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode / eight-hour / m...
ПУСКАТЕЛ тип ПЗТ 40Е

Starters type PZT 40E

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...
ПУСКАТЕЛ тип ПЗТ 63Е

Starters type PZT 63E

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...
ПУСКАТЕЛ тип ПЗТ 100Е

Starters type PZT 100U

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...
ПУСКАТЕЛ тип ПЗТ 160Е

Starters type PZT 160E

Technical Data Name m-ka VITELLA Rated insulation voltage main chain V 500 secondary circuit V 380 Rated thermal current interrupted extended mode (eight-hour) main chain...

Местоположение

Намерете ни на картата
България, 4225 Перущица
ул. "Трети Март" 42
Телефон: 032/654 101
Факс: 032/654 100
E-mail: office@eaz-bg.com